Goal Zero Yeti 1250 Portable Power Station
With a variety of high-powered outputs, storage capacities, and multiples ways to recharge, a Goal Zero Yeti Portable Power station will keep your gear running, indoors and out. The Goal Zero Yeti 1250 gives you power at the push of a button, all without the noise, fumes, or maintenance of a traditional gasoline-powered generator.
Goal Zero Yeti 1250 Features
Yeti 1250 Charging
The Goal Zero Yeti 1250 can be recharged from a regular wall outlet in about 18 hours. You can charge your Yeti with solar panels, and a wall charger at the same time.
Although not the most ideal recharge time, the Goal Zero Yeti 1250 can also be charged by plugging into your car 12V adapter in about 44 hours. Accessories sold separately.
Yeti 1250 Powering
Three 2.1A USB Outlets. The USB port best charges all your large sized or multiple USB powered devices.
The 12V best charges all your 12V powered devices.
Plug in your device just as you would the wall. There are three AC Outlets (pure-sine wave)
What to Power From the Goal Zero Yeti 1250 Lithium
Smartphones, MP3 Players, Digital Cameras, E-readers, Tablets, Lights, 12V Appliances, Laptops, CPAP, Display Monitors, Appliances, Fridges etc.
How Long Will it Take to Charge Your Device From Goal Zero Power Packs
It takes the same amount of time to charge your device from a Goal Zero power pack as it does from the wall.
When charging gear with the Yeti 1250, take note of the LCD Battery Display. If you plug in devices that have a high power requirement (a large refrigerator), the charge level of the Yeti can drop very quickly and you may not get exactly 1250Wh of power. On the flipside, if you’re recharging devices that draw power more slowly (a small TV), you will get closer to 1250Wh. If you’re experiencing shorter run times, you might want to check the device’s power requirements.
Storage and Downtime Maintenance
Having your Yeti 1250 connected to a power source, like a solar panel or wall outlet, between adventures or while in storage keeps its battery healthy and topped off. This prolongs battery life and will ensure your Yeti 1250 is charged and ready to go all day, every day. If you can’t keep the Yeti 1250 plugged into a power source during storage, fully charge your Yeti 1250 every 3 months and store in a cool, dry place. Failure to maintain the Yeti 1250 by following these steps can result in battery damage which will void the product warranty.
|Wall Charger (72W): 18 hours|
|Car Charger (30W): 44 hours|
|2 x Boulder 30: 40-80 Hours|
|3 x Boulder 30: 27-54 Hours|
|Weight: 103 lbs (46.7 kg)|
|Dimensions: 11 x 16 x 14.5 in (27.9 x 40.6 x 36.8 cm)|
|Operating usage temp.: 32-104 F (0-40 C)|
|Cell Type: AGM Lead-Acid|
|Peak Capacity: 1200Wh (12V, 100Ah)|
|Lifecycles: hundreds of cycles|
|Shelf-life: Keep plugged in, or charge every 3 months|
|Internal Battery Dimensions: 12.9 in.L x 6.8 in W x 8.7in H (Group 27)|
|Fuses: 200A (4x 50A fuses in parallel)|
|Management system: MPPT charge controller, low battery protection|
|USB port (output) (2x): 5V, up to 2.1A (10W max), regulated|
|6mm port (output, 6mm, green, hexagon): 12V, up to 10A (120W max), regulated|
|12V car port (output): 12V, up to 10A (120W max)|
|12V Power Pole Port (output): 12V, up to 33A (400W max)|
|AC inverter (output, pure sine wave): 110VAC 60Hz, 10A (1200W continuous, 1500W surge max)|
|Charging port (input, 8mm): 16-48V, up to 10A (160W max)|
|Power Pole charging port (input): 16-48V, up to 20A (240W max)|
|Power Pole chaining port: 12V, up to 180A (2100W max)|
Guide 10 Plus
|Sherpa 50||Sherpa 100|
|Headlamp||2 Charges||5-10 Charges||12 Charges||25 Charges|
|Smartphone||1 Charge||3-5 Charges||7 Charges||14 Charges|
|GoPro||1-2 Charges||5 Charges||9 Charges||18 Charges|
|Digital Camera||1 Charge||3 Charges||5 Charges||10 Charges|
|Tablet||25% Boost||1 Charge||1-2 Charges||2-4 Charges|
|Laptop||N/A||N/A||1 Charge||1-2 Charges|
LA & LI
|Yeti 1250||Yeti 1400|
|Headlamp||37 Charges||100 Charges||200+ Charges||230+ Charges|
|Smartphone||15 Charges||30+ Charges||60+ Charges||70+ Charges|
|GoPro||25 Charges||70+ Charges||200+ Charges||230+ Charges|
|Digital Camera||12 Charges||20+ Charges||100+ Charges||120+ Charges|
|Tablet||6 Charges||10+ Charges||45+ Charges||52+ Charges|
|Laptop||1-2 Charges||3-5 Charges||20+ Charges||23+ Charges|
What type of battery is in the Yeti 1250?
The Yeti 1250 uses a Group 31, 12V, 100Ah, sealed lead-acid battery (AGM), similar to what is found in your car. Here are some basic facts about AGM batteries: *AGM batteries should be kept full at all times. This means you should leave your Yeti 1250 plugged into a power source at all times, especially during storage. *AGM batteries last longer if you do not drain them completely. This stems from the “battery memory myth” in old rechargeable batteries.
How do I know if my device will work with my power station?
First, you’ll need to determine the amount of power your device requires. This may require some research on your end, a good Google search or examining the user guide for your device should suffice.
Can I replace the battery in the Yeti?
Yes, the battery inside is extremely easy to replace.
How do I know if my Yeti is charged?
To check the charge level of your Yeti, refer to the LCD battery display. When lit up, you’ll see a battery outline with five segments, indicating the current charge level. You can turn the Battery Display by pushing the Master Power Button. It is okay to use your Yeti, even when it’s not fully charged.